How to Install an eSIM and Fix Activation Errors
Install your travel eSIM while you have reliable Wi-Fi, then select it for mobile data when you reach the country it covers. Installation adds the eSIM to your phone; activation and connection are separate steps. An eSIM that shows “No Service” before you land may be installed correctly.
The safest approach is to read your plan’s instructions before scanning anything, keep the installation details accessible offline, and leave the eSIM on your phone if it doesn’t connect immediately. Deleting it to start again can make the problem harder to fix.
Before you install: check the three things that matter
First, confirm that your phone supports eSIM and isn’t locked to a mobile carrier. Having a dual-SIM phone doesn’t automatically mean it can use eSIM, and support can vary by model and market. If you’re unsure, use the device eSIM compatibility guide before buying or attempting installation.
Next, check the destinations covered by your plan. A country-specific eSIM won’t necessarily connect during a stopover elsewhere. If you’re changing countries, check each one rather than assuming a single plan covers the whole itinerary. Finally, read the plan’s activation and validity instructions. Some plans begin their validity period on installation; others begin when they first connect to a supported network. Don’t rely on a general rule for a detail that affects when you should set up yours.
You’ll need a stable internet connection to download the eSIM profile, plus the QR code or manual installation details supplied with your purchase. If the QR code is displayed on the phone you’re setting up, open it on another device for scanning or use the manual details if provided. Save a copy of the instructions somewhere you can reach without mobile data. Airport Wi-Fi is a poor place to discover that the only copy is in an email you can’t open.
How to install an eSIM on iPhone
- Connect to Wi-Fi and open Settings. Go to Mobile or Cellular, then choose Add eSIM. Menu names vary by iOS version and region.
- Select Use QR Code and scan the code supplied with your eSIM. If you’ve been given manual installation details, look for the option to enter them instead.
- Follow the on-screen prompts to add the mobile plan. Give the new line a clear label, such as “Travel”, so you can distinguish it from your home line in Settings.
- Check which line is selected for Mobile Data. You can make the travel eSIM your data line when you’re ready to use it at your destination. If you keep your home line active for calls or bank verification texts, review the phone’s settings for data switching so it doesn’t quietly use your home plan for data.
- At your destination, switch on the travel line and follow the supplied instructions for data roaming. Many travel eSIMs need roaming enabled on the travel line to connect, but that does not mean you should enable roaming on your home line.
The exact prompts can differ between iPhones. If a menu has moved or you want to check each screen, use the iPhone eSIM installation guide. Once the eSIM is added, don’t scan the QR code repeatedly: the installation code may not be reusable.
How to install an eSIM on Android
- Connect to Wi-Fi. Open Settings, then find SIMs, Mobile network or Connections. The wording differs between Android manufacturers.
- Choose the option to add a SIM or download an eSIM. Scan the supplied QR code, or enter the manual details if that option and those details are available.
- Accept the prompts to download the eSIM profile. Name it “Travel” if your phone offers a label, then check that it appears alongside your home SIM.
- When you’re ready to use it, set the travel eSIM as the preferred SIM for mobile data. Keep your home SIM selected for calls or texts if you need your usual number and your phone supports that combination.
- At the covered destination, turn on the travel eSIM and set data roaming on that eSIM as your plan’s instructions require. Check your home SIM’s roaming and data settings separately.
Android menus aren’t consistent even between recent phones. The Android eSIM installation guide is useful if your Settings screen doesn’t match these labels. Don’t assume that turning on “Mobile data” alone selects the new eSIM; check which SIM is assigned to data.
When should you switch it on?
For a short city break, installing at home on dependable Wi-Fi removes one job from arrival day. You can leave the travel eSIM installed and select it for data after landing, provided your plan’s validity rules allow that timing. If the instructions say validity starts at installation, wait until the appropriate point in your trip before adding it.
A connection test is only meaningful where the plan has coverage. Seeing no signal while you’re still at home doesn’t necessarily indicate an activation error. Once you land, switch off aeroplane mode, make sure the travel line is enabled, select it for mobile data and allow the phone a little time to register on a network. Then test a webpage with Wi-Fi turned off. A messaging app may show an old conversation even when mobile data isn’t working.
If you’re keeping your Australian number active for one-time passcodes, be deliberate about which SIM handles what. The home line can remain available for calls and texts while the travel eSIM handles data on a compatible dual-SIM phone. Charges or roaming behaviour on the home line depend on your home mobile plan, so check its terms before departure. For a two-week trip where you’ll rely on maps and rideshare apps, it’s worth checking these settings before you leave the terminal rather than discovering the wrong data line was selected later.
Fix common installation and activation errors
The QR code won’t scan
Increase the brightness of the screen displaying the code, clean the camera lens and make sure the full code is visible. A screenshot on another device may be easier to scan than a printed page with a crease. If scanning still fails, use the supplied manual installation details if available. Check that you’re in the phone’s Add eSIM flow, not scanning through the ordinary camera app.
The code says it’s invalid or already used
Check whether the eSIM is already listed in your phone’s SIM settings. An interrupted-looking setup may actually have completed. Installation codes may be single-use, so repeatedly rescanning can’t necessarily recover a profile. Don’t delete an installed eSIM in an attempt to reset the code. If it isn’t on your phone, keep the exact error message and contact EscapeSIM through the support route provided with your purchase.
The eSIM is installed but shows no service
Confirm you’re in a covered country and that the travel line is switched on. Toggle aeroplane mode once, then restart the phone if needed. An installed eSIM outside its coverage area won’t register just because installation succeeded. On a multi-country trip, check the next country against your plan’s coverage before assuming the phone has developed a fault.
There’s signal, but apps won’t load
Turn Wi-Fi off for a proper mobile-data test. Make sure the travel eSIM, not your home SIM, is selected for data; then check whether data roaming is enabled on the travel line as instructed. If the plan supplies APN settings, enter them exactly as provided rather than guessing. The eSIM data connection troubleshooting guide covers the next checks when the signal bars are there but nothing loads.
A remote worker planning to tether a laptop should test an ordinary webpage on the phone before troubleshooting the hotspot. If the phone itself has no data, changing laptop settings won’t fix it. If only tethering fails, check your phone’s hotspot settings and your plan’s terms separately.
If it still won’t connect
Stop before removing the eSIM or resetting your phone’s network settings. Take screenshots of the error, the travel line’s status and the selected data SIM, then note your phone model, destination and what you’ve already tried. Those details make a support conversation far more useful than “it isn’t working”.
If you haven’t chosen a plan yet, check EscapeSIM’s available options for your actual route, especially if you’re crossing borders. For example, the Germany eSIM plans and Greece eSIM plans are separate destination pages; check the coverage and activation terms of the plan you select rather than assuming one country page covers both. Do that before departure, while you can still sort out compatibility and timing on a reliable connection.
Preguntas frecuentes
Can I install my travel eSIM before I fly?
Why does my new eSIM say No Service?
Should I turn on data roaming for my travel eSIM?
Can I keep my usual number while using a travel eSIM?
Should I delete an eSIM that failed to activate?
Más del blog
Choose the best eSIM for Japan from Australia by checking coverage, usable data, validity and support before you pay.
Check this Oppo eSIM phone list by series, learn why regional variants differ, and verify your handset before buying a travel eSIM.
Can't find Add eSIM on your Galaxy A32 5G? Here's where the setting actually lives, why screenshots differ, and how to set it up before you fly.